You need to upgrade your Flash Player
20L Single Measure Pack A single PUMPWATCH test measure with nominal capacity 10L or 20L (each with ID 300mm) is suspended from a light-weight 2-wheel transport trolley in such a manner that the combined centre of gravity of the test measure full of fuel and the transport trolley, is balanced over the wheel axis, when the transport trolley is lifted to it’s “travelling position” thus greatly reducing the effort required to move the the test measure full of fuel around the service station to the fuel return area. Lesser capacity test measures (2L and 5L with ID typically 150mm) are typically not transported alone on a transport trolley. Instead they may be suspended alongside a 10L or 20L test measure in “tandem measure pack” format by means of a “tandem H-frame” where a lesser diameter (2L or 5L) test measure is suspended alongside a greater diameter (10L or 20L) test measure.
PUMPWATCH Guarantee All our PUMPWATCH Test Measure are manufactured to the highest standard. Our PW Lite are factory calibrated with an accuracy of ±4ml (over 2 times better than what can be read on the fuel dispenser meter). With the factory calibration, our test measures can be use only as a reference to check the fuel dispenser. In order to carryout legal verifications, calibrations and inspections it is necessary for the test measures to be calibrated and sealed by an accredited metrology laboratory. Weights and Measures Test Certificates. PUMPWATCH can arrange for your test measure to be calibrated by NSAI or any accredited Legal Metrology Laboratory at an extra cost. Typically, when calibrated and sealed by a National Metrology Laboratory, our test measures have an accuracy of 0.02% or better. |